Regional Manufacturing Engineer – Americas (Ciudad Apodaca)

Regional Manufacturing Engineer – Americas (Ciudad Apodaca)

18 nov
|
Multi-Wing
|
Ciudad Apodaca

18 nov

Multi-Wing

Ciudad Apodaca

About the Opportunity. At Multi-Wing, we are looking for an experienced and results-driven Regional Manufacturing Engineer – Americas to lead manufacturing engineering initiatives, support production expansion, and drive operational excellence across our manufacturing facilities in the Americas. Based in México, this position will support four manufacturing sites: two in Monterrey, Mexico; Middlefield, Ohio, USA; and Brazil.

The role will serve as the primary regional connection with Global Manufacturing Engineering, ensuring alignment with global standards, processes, and best practices.

A key focus will be supporting the transfer and duplication of Inlet and Motor production processes from Italy to Mexico, while leading continuous improvement initiatives, manufacturing capacity expansion, and the regional deployment of Lean Manufacturing.

This opportunity is ideal for a hands-on engineering professional who combines strong technical manufacturing expertise with leadership capabilities, strategic thinking, and experience working in international environments.

Key Responsibilities

1. Regional Manufacturing Engineering Leadership

- Serve as the regional Manufacturing Engineering representative for the Americas, ensuring alignment with Global Manufacturing Engineering standards and methodologies.
- Collaborate with plant management and regional leadership to establish manufacturing engineering priorities and strategic initiatives.
- Drive improvements in safety, quality, delivery, productivity, and manufacturing costs.
- Provide technical direction and support to local Manufacturing Engineering teams.
- Monitor project progress, identify risks, and communicate resource requirements and operational priorities.
- Promote standardization and knowledge sharing across manufacturing facilities.

2. Manufacturing Process Transfer & Production Expansion

- Lead and support the transfer and duplication of motor and inlet manufacturing processes from Italy to Mexico.
- Coordinate process definition, equipment selection, tooling, production layouts, material flow, and workstation design.
- Support equipment installation, commissioning, process validation, production ramp-up, and line stabilization.
- Optimize newly implemented manufacturing lines to improve cycle times, quality, production capacity, and operational efficiency.
- Coordinate additional production capacity installations based on business requirements.
- Ensure alignment with global manufacturing standards while supporting approved local process adaptations.
- Collaborate with international engineering teams, suppliers, contractors, and cross-functional stakeholders.

3. Motor Manufacturing Engineering

- Provide technical expertise in industrial motor manufacturing processes, including winding, stator and rotor assembly, balancing, and final testing.
- Support manufacturing process development, optimization, and troubleshooting.
- Improve equipment performance, production flow, process capability, and manufacturing efficiency.
- Identify opportunities for automation,



tooling improvements, and manufacturing cost reduction.
- Support production teams in resolving technical and operational challenges.

4. Lean Manufacturing & Continuous Improvement

- Lead the implementation and regional deployment of Lean Manufacturing methodologies.
- Develop and execute Lean improvement roadmaps across manufacturing sites.
- Promote 5S, Kaizen, Value Stream Mapping (VSM), visual management, standardized work, and structured problem-solving practices.
- Facilitate continuous improvement initiatives focused on waste elimination, productivity, quality, and operational efficiency.
- Establish and monitor performance indicators to evaluate Lean implementation results.
- Train and coach engineering and operations teams in Lean methodologies and continuous improvement practices.

5. Manufacturing Process Engineering & Optimization

- Design, develop, document, and optimize manufacturing processes, workstations, production layouts, and material handling systems.
- Conduct time studies, cycle-time analysis, line balancing, and production capacity evaluations.
- Identify production bottlenecks and implement corrective improvement actions.
- Improve equipment utilization, tooling, fixtures, and manufacturing methods.
- Support root cause analysis and corrective actions for quality and process deviations.
- Ensure manufacturing documentation, work instructions, process parameters, and engineering changes are properly maintained.

6. Technical Leadership & Team Development

- Provide technical guidance, mentoring, and coaching to Manufacturing Engineers and plant teams.
- Develop engineering capabilities through standardized practices, technical training, and knowledge sharing.
- Support the professional development of local engineering resources.
- Foster collaboration between manufacturing sites and integral engineering teams.
- Promote a culture of accountability, technical excellence, and continuous improvement.

7. Cross-Functional & International Collaboration

- Collaborate with Manufacturing, Operations, Quality, Maintenance, Supply Chain, Planning, Engineering, and Global Manufacturing Engineering teams.
- Coordinate technical projects and manufacturing improvements across multiple locations.
- Work closely with engineering teams in Italy to ensure successful process transfers and production standardization.
- Provide direct manufacturing engineering support to facilities without dedicated local engineering resources.
- Travel internationally to support production implementation, engineering projects, and operational improvement initiatives.

Required Qualifications





- Bachelor’s degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Mechatronics Engineering, or a related field.
- Lean Manufacturing or Continuous Improvement certification or formal training is strongly preferred.
- Additional training in project management, quality tools, ergonomics, or occupational safety is an advantage.

Professional Experience

- 10–12 years of experience in Manufacturing Engineering within an industrial manufacturing environment.
- 5+ years of hands-on experience in industrial motor manufacturing, including winding, assembly, balancing, and final testing.
- 3+ years of experience in manufacturing process transfers, production line installations, facility start-ups, or manufacturing ramp-ups.
- 3+ years of experience in sheet-metal manufacturing, fabrication, forming, or related manufacturing processes.
- 5+ years of experience leading Lean Manufacturing and Continuous Improvement initiatives.
- 3+ years of experience providing technical leadership, coaching, or mentoring to engineers.
- Experience supporting multiple manufacturing facilities or collaborating with global engineering teams is strongly preferred.

Technical Skills & Knowledge

- Industrial motor manufacturing processes
- Manufacturing process design and optimization
- Production line installation and commissioning
- Process transfers and manufacturing ramp-up
- Lean Manufacturing, Kaizen, 5S, and VSM
- Time studies, cycle-time analysis, and line balancing
- Production capacity planning and material flow
- Sheet-metal fabrication and forming processes
- Root Cause Analysis, 5 Why, Ishikawa, and Pareto
- Manufacturing documentation and engineering change control
- CAD drawings, technical specifications, and Bills of Materials (BOM)
- ERP systems and Microsoft Excel
- Project management and cross-functional coordination
- Manufacturing KPIs and performance reporting

Leadership & Professional Competencies

- Strong ownership, accountability, and initiative.
- Strategic thinking and the ability to influence manufacturing priorities.
- Excellent analytical and structured problem-solving capabilities.
- Hands-on technical leadership and a practical approach to manufacturing challenges.
- Strong communication and interpersonal skills.
- Ability to coach, develop, and influence engineering teams.
- Effective organization and management of multiple priorities.
- Adaptability to changing operational needs and international environments.
- A results-oriented mindset focused on safety, quality, productivity, delivery, and cost.

Language & Travel Requirements

- Professional English proficiency is required.
- Spanish proficiency is strongly preferred.
- Willingness to travel approximately 25% of the time, including periodic visits to Italy, the United States, and Brazil.

?✨ Interested in Joining Our Team? If you have a strong background in Manufacturing Engineering, industrial motor manufacturing, and international production projects, we would like to hear from you.

📌 Regional Manufacturing Engineer – Americas (Ciudad Apodaca)
🏢 Multi-Wing
📍 Ciudad Apodaca

Postulate a este anuncio

Muestra tus habilidades a la empresa, rellenar el formulario y deja un toque personal en la carta, ayudará el reclutador en la elección del candidato.

Suscribete a esta alerta:

Recibe por email las nuevas ofertas de trabajo para: regional manufacturing engineer – americas (ciudad apodaca) / ciudad apodaca

Suscribete a esta alerta:

Recibe por email las nuevas ofertas de trabajo para: regional manufacturing engineer – americas (ciudad apodaca) / ciudad apodaca