Lead Embedded Firmware (México)

Lead Embedded Firmware (México)

16 nov
|
Lumysi
|
México

16 nov

Lumysi

México

About Lumysi Lumysi is a US-based wearable technology startup developing a jewelry-inspired health and fitness bracelet. Our screenless titanium wearable continuously tracks health, activity, sleep, recovery, and women's health metrics while keeping the look and comfort of a premium accessory. The product combines biometric sensors, ultra-low-power embedded systems, Bluetooth connectivity, interchangeable straps, and a mobile app that turns health data into personalized insights. The Role We are hiring a senior engineer to own the firmware and the hardware/firmware integration of the Lumysi wearable end to end, from bring-up of new prototype boards through production release. You will be the technical reference for embedded development. You will set the firmware architecture, make the hard trade-offs between battery life, sensor quality and connectivity, and raise the bar for a growing engineering team. This is a hands-on role. You will write production C/C++ every week, work at the bench with a scope and a power profiler, and collaborate directly with the founders, hardware engineers, the mobile team, sensor suppliers and contract manufacturers. What You'll Own
• Firmware architecture on Nordic (nRF52/nRF53) and Espressif platforms: RTOS design (Zephyr/nRF Connect SDK or FreeRTOS), task model, memory, boot flow and modularity.
• Bring-up of new board revisions, working from schematics and datasheets: clocks, power rails, memories, sensors, PMIC and peripherals.
• The device power budget. You will implement sleep modes, wake-up sources, sensor duty-cycling and BLE connection parameters to reach multi-day battery life, and validate them at µA level with power-profiling tools.
• Biometric acquisition: drivers and pipelines for PPG, IMU and skin-temperature sensors,



covering sampling strategy, FIFO/buffering, timestamping and data quality under motion.
• BLE: custom GATT services, reliable sync of stored data to iOS/Android, connection robustness and sniffer-based debugging. You will also work with hardware on RF/antenna performance inside a titanium enclosure. Battery and charging: PMIC, charger and fuel-gauge integration, battery protection and accurate state-of-charge reporting.
• Security and updates: secure boot, signed OTA/DFU with rollback, secure element integration, and PKI-based device identity and provisioning.
• Manufacturing: factory test firmware, calibration, provisioning flows and production-line support with our contract manufacturer.
• Engineering discipline: code reviews, coding standards, CI, hardware-in-the-loop testing, release management and documentation. You will also mentor and unblock other engineers on the team.
• The firmware perspective in schematic reviews, component selection and design for testability. Must-Have
• 7+ years of professional embedded development in C/C++ on resource-constrained MCUs, both bare-metal and RTOS.
• Firmware lead or primary firmware owner of at least one battery-powered, BLE-connected product that shipped to volume production. You have lived through EVT, DVT, PVT and post-launch field issues, and can walk us through them in detail.




• Deep BLE

experience:
GATT design, connection and advertising tuning, throughput vs. power trade-offs, and iOS/Android interoperability.
• Proven ultra-low-power optimization on real hardware, backed by measurements.
• Strong electronics fundamentals. You read schematics and layouts confidently, understand power rails, analog front-ends and noise, and can tell whether a bug lives in hardware or firmware.
• Board-level debugging with JTAG/SWD, oscilloscopes, logic analyzers, BLE sniffers and power analyzers.
• Sensor drivers over I2C, SPI and UART, plus interrupts, DMA, timers and ADCs.
• Git, CI and structured testing, with Python for test tooling and automation.
• Professional working proficiency in English, and comfort working directly with founders and external partners in a fast-moving startup. Strong Plus
• Wearable, medical or consumer devices with biometric sensors (PPG, SpO₂, IMU, skin temperature), including signal quality, calibration and motion artifacts.
• Zephyr / nRF Connect SDK and MCUboot in production.
• Embedded security: secure elements, secure boot, cryptographic provisioning.
• RF/antenna tuning in compact or metal enclosures, FCC/IC/CE pre-compliance and Bluetooth SIG qualification.
• Production ramp with contract manufacturers.
• Experience as a founding or first senior engineer at an early-stage hardware startup.

What We Offer
• Ownership of the firmware and embedded architecture of an international wearable product.
• Direct collaboration with the founders, engineering team and manufacturing partners.
• Real decision-making power from day one: your choices ship.

📌 Lead Embedded Firmware (México)
🏢 Lumysi
📍 México

Postulate a este anuncio

Muestra tus habilidades a la empresa, rellenar el formulario y deja un toque personal en la carta, ayudará el reclutador en la elección del candidato.

Suscribete a esta alerta:

Recibe por email las nuevas ofertas de trabajo para: lead embedded firmware (méxico) / méxico

Suscribete a esta alerta:

Recibe por email las nuevas ofertas de trabajo para: lead embedded firmware (méxico) / méxico