13 nov
|
Vistance Networks
|
Tijuana
13 nov
Vistance Networks
Tijuana
job family summary
note - this section will be standard for all jobs within a given sub function.
assemble a wide variety of electronic and mechanical assemblies. Support the assembly level construction and rework of engineering prototype units.
scope
the scope of this role requires the incumbent to possess a moderate understanding of general aspects of the job or be in the process of gaining knowledge and skills through a training period.
- works under close supervision. Normally receives detailed instructions on all work and frequent checking of work quality and performance.
- works on assignments that are routine in nature, requiring limited judgment.
- acquires job skills and learns company policies and procedures to complete tasks.
primary duties and responsibilities
(specific to the role; completed/modified by the hiring manager. List the primary job duties and responsibilities of the role in order from most critical to least critical.)
- perform electrical/mechanical assembly and integration of electronic hardware.
- perform component prep and soldering of various wire/cable assemblies, through hole components, standard and fine pitch surface mount technology (smt) components.
- perform microscopic hand soldering and assembling of electronic modules according to written instructions.
- perform multiple tasks of manual assembly.
- interface with engineering personnel to provide feedback on engineering prototype assemblies.
- track, maintain, and requisition engineering electronic component part stock levels as required.
- perform other duties as required.
qualifications
required education and experience:
(outside of the u.s., the required degree and/or years of experience may vary in some countries. Verification with local hr is necessary.)
- typically requires 0-2 years of general work experience.
- high school diploma, technical school certificate or ged.
- 1 years of related experience.
preferred education and experience:
(specific to the role; completed/modified by the hiring manager. Specify the degree and the type/duration of experience.)
additional knowledge, skills & abilities :
(specific to the role; completed/modified by the hiring manager.)
- knowledge of latest electronic assembly hand tools and soldering equipment.
- familiarity with ipc standards for through hole,
- ability to communicate and work within a cross-functional team based environment.
- knowledge of international organization for standardization (iso) practices.
- ability to communicate effectively in both verbal and written form.
- effective at working in team situations.
nivel de inglés (dejar solo la opción que aplique)
0 – no requerido por el puesto.
conocimiento computacional (dejar solo la opción que aplique)
0 – no requerido para el puesto.
working conditions :
(specific to the role; completed by the hiring manager if applicable. Indicate if the job requires special working conditions such as shift work, working outdoors, etc)
- exposure to typical manufacturing conditions including noise, machinery, fumes and dust.
- must wear safety equipment as required.
required physical/visual/hearing abilities :
(specific to the role; completed by the hiring manager if applicable. Indicate if the job is physically demanding; requires the incumbent to stand for long periods of time, lift heavy objects on a regular basis,
job family summary
note - this section will be standard for all jobs within a given sub function.
assemble a wide variety of electronic and mechanical assemblies. Support the assembly level construction and rework of engineering prototype units.
scope
the scope of this role requires the incumbent to possess a moderate understanding of general aspects of the job or be in the process of gaining knowledge and skills through a training period.
- works under close supervision. Normally receives detailed instructions on all work and frequent checking of work quality and performance.
- works on assignments that are routine in nature, requiring limited judgment.
- acquires job skills and learns company policies and procedures to complete tasks.
primary duties and responsibilities
(specific to the role; completed/modified by the hiring manager. List the primary job duties and responsibilities of the role in order from most critical to least critical.)
- perform electrical/mechanical assembly and integration of electronic hardware.
- perform component prep and soldering of various wire/cable assemblies, through hole components, standard and fine pitch surface mount technology (smt) components.
- perform microscopic hand soldering and assembling of electronic modules according to written instructions.
- perform multiple tasks of manual assembly.
- interface with engineering personnel to provide feedback on engineering prototype assemblies.
- track, maintain, and requisition engineering electronic component part stock levels as required.
- perform other duties as required.
qualifications
required education and experience:
(outside of the u.s., the required degree and/or years of experience may vary in some countries. Verification with local hr is necessary.)
- typically requires 0-2 years of general work experience.
- high school diploma, technical school certificate or ged.
- 1 years of related experience.
preferred education and experience:
(specific to the role; completed/modified by the hiring manager. Specify the degree and the type/duration of experience.)
additional knowledge, skills & abilities :
(specific to the role; completed/modified by the hiring manager.)
- knowledge of latest electronic assembly hand tools and soldering equipment.
- familiarity with ipc standards for through hole,
- ability to communicate and work within a cross-functional team based environment.
- knowledge of international organization for standardization (iso) practices.
- ability to communicate effectively in both verbal and written form.
- effective at working in team situations.
nivel de inglés (dejar solo la opción que aplique)
0 – no requerido por el puesto.
conocimiento computacional (dejar solo la opción que aplique)
0 – no requerido para el puesto.
working conditions :
(specific to the role; completed by the hiring manager if applicable. Indicate if the job requires special working conditions such as shift work, working outdoors, etc)
- exposure to typical manufacturing conditions including noise, machinery, fumes and dust.
- must wear safety equipment as required.
required physical/visual/hearing abilities :
(specific to the role; completed by the hiring manager if applicable.
Indicate if the job is physically demanding; requires the incumbent to stand for long periods of time, lift heavy objects on a regular basis,
job family summary
note - this section will be standard for all jobs within a given sub function.
assemble a wide variety of electronic and mechanical assemblies. Support the assembly level construction and rework of engineering prototype units.
scope
the scope of this role requires the incumbent to possess a moderate understanding of general aspects of the job or be in the process of gaining knowledge and skills through a training period.
- works under close supervision. Normally receives detailed instructions on all work and frequent checking of work quality and performance.
- works on assignments that are routine in nature, requiring limited judgment.
- acquires job skills and learns company policies and procedures to complete tasks.
primary duties and responsibilities
(specific to the role; completed/modified by the hiring manager. List the primary job duties and responsibilities of the role in order from most critical to least critical.)
- perform electrical/mechanical assembly and integration of electronic hardware.
- perform component prep and soldering of various wire/cable assemblies, through hole components, standard and fine pitch surface mount technology (smt) components.
- perform microscopic hand soldering and assembling of electronic modules according to written instructions.
- perform multiple tasks of manual assembly.
- interface with engineering personnel to provide feedback on engineering prototype assemblies.
- track, maintain, and requisition engineering electronic component part stock levels as required.
- perform other duties as required.
qualifications
required education and experience:
(outside of the u.s., the required degree and/or years of experience may vary in some countries. Verification with local hr is necessary.)
- typically requires 0-2 years of general work experience.
- high school diploma, technical school certificate or ged.
- 1 years of related experience.
preferred education and experience:
(specific to the role; completed/modified by the hiring manager. Specify the degree and the type/duration of experience.)
additional knowledge, skills & abilities :
(specific to the role; completed/modified by the hiring manager.)
- knowledge of latest electronic assembly hand tools and soldering equipment.
- familiarity with ipc standards for through hole,
- ability to communicate and work within a cross-functional team based environment.
- knowledge of international organization for standardization (iso) practices.
- ability to communicate effectively in both verbal and written form.
- effective at working in team situations.
nivel de inglés (dejar solo la opción que aplique)
0 – no requerido por el puesto.
conocimiento computacional (dejar solo la opción que aplique)
0 – no requerido para el puesto.
working conditions :
(specific to the role; completed by the hiring manager if applicable. Indicate if the job requires special working conditions such as shift work, working outdoors, etc)
- exposure to typical manufacturing conditions including noise, machinery, fumes and dust.
- must wear safety equipment as required.
required physical/visual/hearing abilities :
(specific to the role; completed by the hiring manager if applicable. Indicate if the job is physically demanding; requires the incumbent to stand for long periods of time, lift heavy objects on a regular basis,
📌 Operator i, production line (Tijuana)
🏢 Vistance Networks
📍 Tijuana