Quality Inspector focused on plasma, blend, sandblast, chemical cleaning and thermal processes, among others.
Its primary purpose is to audit, measure, and release parts between each of the stages of the repair process to ensure that they meet the limits of the Component Maintenance Manual (CMM).

Main functions in process

Intermediate Inspection: Visually and dimensionally evaluate the parts before, during and after each critical process to authorize their progress to the next station.
Special Process Monitoring: Audit that the operating parameters of the machines (furnace temperatures, sandblast pressure, plasma voltages, and chemical bath concentrations) strictly match the Travelers.
Thickness and Roughness Release: Measure layer thickness after the plasma process and verify surface roughness (Ra) post-sandblast using rugosimeters and micrometers.
Blend Control: Dimensionally inspect areas repaired by blending to ensure that material removal does not exceed the minimum engineering limits allowed by the manufacturer.
Documentation and Signatures (Stamp): Validate and stamp work orders (Travelers) at each phase of the process, ensuring total traceability of the component.
Non-Conforming Product Handling: Identify deviations in the process (e.g., cracks after heat treatment or defective plasma coatings), segregate the part,



and open the corrective action report (NCR).

Job Requirements

Requirement

Technical Detail

Education

Complete Technical or High School (Mechanics, Aeronautics, Metallurgical or Materials).

Experience

Minimum 1 to 2 years as a process quality inspector in aeronautical workshops (MRO) or heavy metalworking industry.

Advanced Metrology

Expert use of indoor/outdoor micrometers, vernier, roughness meters, thickness gauges by Eddy currents or ultrasound.

Non-Destructive Testing (NDT)

Basic certification or knowledge in visual inspection (VT) and penetrating liquids (PT) desirable.

Technical Reading

Interpretation of geometric plans and dimensional tolerance (GD&T;), as well as repair manuals in English.

Competencies and Regulatory Compliance

Special Process Audit: Operational knowledge of Nadcap audit requirements for heat treatments, coatings (plasma) and chemical processing.
Firm Technical Criteria: Ability to stop the production line if it detects that a process parameter (such as the temperature of a furnace) is out of tolerance.

FOD Prevention: Active monitoring to ensure that no contaminants are introduced between chemical cleaning processes and plasma application.

📌 Quality Control - QC Inspector II / Inspector de Calidad 1 - 2do Turno (Mexicali)
🏢 Chromalloy
📍 Mexicali