**Responsibilities Include**:
- Advisement, coordination, and interaction with all departments to accomplish all objectives.
- Assuring provisions for the use of checklists, process sheets, travelers, and drawings.
- Assure that he/she is present when inspections are required.
- Be able to continuously travel between and work from different NOV and vendor facilities locations as necessary.
- Determination of necessary hold points for inspections and tests to be performed.
- The authority to accept, reject, and to place on hold any item or operation where conformance to drawing, specification, contract and/or purchase order is not being accomplished.
- Verification of operations set up and/or fit up.
- In-process inspection of all metal prep/saw, weld shop and machine shop operations.
- Visual and dimensional inspection of all weldments prior to blast, paint, heat treat, etc.
- 100% final inspection.
- Review all parts and/or equipment, as necessary, prior to shipment.
- Verifying and accepting Material Test Reports (MTRs).
- Work to complete any documentation required by customer, purchase order, or specification.
- Perform NDE and/or dimensional inspection as needed.
- Familiar with and maintains PQRs (Procedure Qualification Record), WPSs (Weld Procedure Specification), and WPQs (Weld Performance Qualification).




- Familiar with and maintain calibration and calibration records of tools and equipment.
- Maintenance of records as described in the QA Procedure Manual.
- Maintain welder continuity.
- Create, issue, and follow up on NCR’s (Nonconformance Report) and CAR’s (Corrective Action Request), while assisting with RCA (Root Cause Analysis).
- Adhere and support all company rules and policies.
- Must follow and enforce all safety and environmental policies and programs; must be able to use personal safety devices as required by company policy; report any activities that could be detrimental to the safety and/or the loss of productivity; report any injuries when they occur.
**POSITION**:QC Inspector
**LOCATION**:Guadalupe (Monterrey), Reciente Leon, Mexico; Vendor facility
**List of mínimal requirements for this position**:
- Minimum of three (3) years of experience in Quality Control, Welding and Fabrication Inspection, Machining Inspection.
- Excellent verbal and written communication skills; **must be able to read, write, and speak English **.
- Proficient in Microsoft Office.
- Good interpersonal working skills.
**The following items are necessary to perform job duties**:
- Lifting (25 lbs.)
- Bending
- Stooping
- Walking
- Good Hearing
- Standing (5-6 Hours per day)
- Sitting (2-3 Hours per day)
- Pushing (25 lbs.)
- Pulling (25 lbs.)
- Good Vision

📌 Engineer.quality.iv (Veracruz)
🏢 NOV
📍 Veracruz